Home / News & Events / Industry News / Scissor Jack 2 Ton Is Standard Equipment For Cars


Scissor Jack 2 Ton Is Standard Equipment For Cars


The Scissor Jack 2 Ton consists of a metal connected in […]

The Scissor Jack 2 Ton consists of a metal connected into a diamond-shaped hinge and a diamond that connects the diamond's opposite face. By using the wrench to turn the screw, you can achieve the effect of raising or lowering. Scissor jack 2 ton is as standard equipment for most vehicles when you need to replace tires. However, it is worth noting that trucks and high-clean vehicles are equipped with different types of jacks due to their chassis weight and height and both. This particular type of jack is operated by converting the rotary motion into a linear shape because when the jack is placed between the solid ground and the vehicle chassis, the rotation of the screw causes the expansion or contraction of the diamond shape and then converts it into an upward Force or downward force.

The weight of the scissor jack 2 ton is lighter, and over time, the wear jacks can wear more quickly. If you like to do automatic maintenance and repair at home, this may be a major drawback. In addition, the diamond shape although the shape is very strong, but under extreme loads may be more prone to failure. So you may have to consider what you want to lift to avoid the disaster. It is difficult to use a jack frame with a scissors jack because the maximum lift height of the jack is usually insufficient to allow sufficient clearance of the jack frame to slide under the vehicle. Therefore, we do not recommend the use of scissors jacks for any type of general maintenance work.

In the case of a scissor jack 2 ton, a hydraulic cylinder (manual type, electric type) is installed at the small finger position of the hand, and the outside of the scissors Set up a platform, one as a support base, and one as a lifting object. Scissors jack on the success of the production. Its working principle is: in the hydraulic cylinder jack head to drive the top of the contact with the support of the separation of the base, the resulting lifting effect of the object. Because it looks like a scissors, used to be called scissors jack.