Home / News & Events / Industry News / Be Careful To Use The 6 Ton Jack Stands


Be Careful To Use The 6 Ton Jack Stands


It should be noted that, regardless of the useful truck […]

It should be noted that, regardless of the useful truck is the transport side, in the replacement of tires or simply correct the deviation between them, you must be careful. This is because improper use of the yipengjack 6 Ton Jack Stands frame may lead to unimaginable avoidable accidents. If you do not follow the instructions in the user manual, the jack may slide, the vehicle may fall, will cause harm to people under the car.

The most dangerous mistake that many people committed when disassembling and replacing flat tires is to lift the vehicle on a sloping surface. This gives the truck a good chance to move in any way to make Jack stand up. The uneven surface is also very unsafe for starting the car. These may also cause the socket to fall.

Owners should know the weight of their car. It is important to note that trucks, especially different brands of trucks, have different weights. However, many cars may look the same size, and should not be considered the same weight, so use the same jack on both. Different jacks are made for their cars, and therefore should not be used for others, otherwise they may be damaged by exerting too much pressure on them.

Before you get off, you must make sure that the vehicle is static and can not make the slightest movement. In most cases, this is done by setting the parking brake or brake so that the truck does not move after stopping. In this state, the vehicle is easy to safely lift, there is no risk of sliding and causing accidents.

6 ton jack stands will not last forever, so they will fail because of age. As a result, car owners are aware that if a jack of a car is shipped from a factory, an appropriate alternative must be sought. As long as any 6 ton jack stands can make many lives at risk, especially if the capacity is lower than the recommended vehicle capacity. In this case, the 6 ton jack stands are ideal because they are generic and can effectively lift all trucks.