Home / News & Events / Industry News / Different Types Of The Car Transmission Jack


Different Types Of The Car Transmission Jack


Whether you are a do-it-yourself person or a specialist […]

Whether you are a do-it-yourself person or a specialist, gearbox jacks are what you need to install a new gearbox or dismantle different types of vehicles. Often, choosing a car transmission jack depends on the load you want to give - a lifting capacity range of 600 pounds to 4000 pounds, but with a professional garage, a variety of options for the car transmission jacks will be more suitable. It will allow many different types of transmission to work on. Because these jacks are expensive, you also have to consider the workload expectations for their durability.

Transmission is an integral part of vehicle engineering and it is very heavy. Whether you are engaged in the car, truck or motorcycle gearbox, gearbox jack recommended. These are usually made of heavy-duty steel and use simple rollers on ball bearings. During the repair process, the saddle is tilted for easy positioning of the gearbox.

Depending on the needs, different types of car transmission jacks Yipengjack can be used. Among them, you will find retractable, hydraulic lifts, high lifts, low-profile transmission jack. There are a variety of adapters, including many useful additional tools, that will turn a standard jack into a Yipengjack Car Transmission Jack.

There are two things to consider when choosing a tool. One is weight capacity and other inherent safety mechanisms, including stability and maneuver options. Transmission jacks must be able to withstand the weight of the vehicle driveline. Jack feet wide, contribute to the stability, and rolling jacks can be easily deployed. In order to quickly and accurately lift the car, you can also consider the use of air-assisted or hydraulic transmission jacks.

Place the gearbox jack under the car and connect the compressed air line to the intake jack on the gearbox jack. Place the jack in the center position with its arms extending to the fluid plate of the transmission. Extend the compressed air through the jack and push the actuator up slightly to remove its weight from the bolts that secure it to the vehicle. Secure the transfer unit to the ceiling of the transfer jack. Use accessory straps or shims for proper fit. When installing or removing a gearbox, place its weight on the extension arm of the gearbox jack. The plate at the top of the extension arm is usually large enough to keep the transmission safe. As a result, the jacks are easy to carry with the weight of the gearbox for any repair work and reinstallation on the vehicle.