Home / News & Events / Industry News / The Car Transmission Jack Can Serves The Ground Transmission


The Car Transmission Jack Can Serves The Ground Transmission


If you have tried a gearbox without a Car Transmission […]

If you have tried a gearbox without a Car Transmission Jack or a ground jack with a transmission jack adapter, you can know how difficult and dangerous it is. The odd shape of most gearboxes makes it almost impossible on the saddle of a traditional floor jack, with an average weight of 150 pounds, and it is unwise to try to pull it by hand. Even worse, it is easy to release the gearbox. This is the real challenge. Providing the right tools for your work can greatly reduce frustration and risk associated with transmission removals. The following purchase guide should take the speculation to buy the car transmission jacks that fit your needs.

The car transmission jack has two different varieties, independent and adapter. The individual jack has its own hydraulic unit, designed primarily for the maintenance of the gearbox. There are two different types of independent jacks. The first looks like a standard floor jack, and the saddle is replaced by an adjustable table. These are designed for maintenance of the transmission in the vehicle on the socket. The second type of independent jack is called a base jack, designed to provide a transmission in a vehicle on an elevator.

Adapter type transmission jacks are designed for existing floor sockets with removable saddles. Keep in mind that when you purchase an adapter type jack, you need to have a hydraulic ground jack, and you must make sure that the saddle mounting hole and the adapter mounting hole are the same size. If you consider the adapter type jack, the other thing is to take into account the jack mobility is limited, because the traditional floor jack in the back only caster wheels. Most of the independent transmission jacks use caster wheels, all four wheels, making Jack easier to manipulate.

In general, pedestal car transmission jack can serve higher than ground transmissions because they are designed to provide transmissions for vehicles that rise on elevators. They can not be effectively used on ground or jacks on the vehicle. In order to service the gearboxes in these vehicles, you need to use a separate trolley type transmission jack or a standard floor jack with a transmission jack adapter. If your vehicle has a hoisting crane or a large diameter tire, then you need to make sure that the gearbox jack is lifted enough to reach the underside of the gearbox and that there is an additional lift range.