Home / News & Events / Industry News / Three Types of the Floor Transmission Jack to Understand


Three Types of the Floor Transmission Jack to Understand


There are three different types of Floor Transmission J […]

There are three different types of Floor Transmission Jack, each with a specific function. The first floor jacks are used at home, especially those who have a sagging foundation or wall a few inches away from the collapse. The floor jack used in this particular aspect supports the entire floor of the floor so that the replacement joist can be added to the original frame. Once the original frame of the house or building is replaced, the whole structure is carefully lowered and fixed on a new basis.

Of course, even in the case of a good foundation, you can also use the home outlet. This is a solid metal rod, flat end placed under the main beam of the house and tightly held in its position. This is a precautionary measure because solid metal supports the main girders of the house, thus preventing the final sag.

The second type of jack is for the telephone and cable adapter. This type of jack contains a phone plugin or date plugin port that can be connected to a computer phone line. This floor jack usually sinks into the floor or is mounted on the substrate where the floor and wall meet. This type of jack is usually pre-wired, which means that it must be connected to the existing (and active) telephone data or wiring in the home before installing it in place. Once installed, it will be permanent and hard to stand out.

The last type of jack is the car floor jack for the car shop. These car floor jacks use hydraulic lift to lift heavy vehicles such as personal cars and trucks. When used, it is usually flat on the ground to produce a uniform weight distribution. There are different types of car jacks for different weights of vehicles. The rating of the car jack varies from 2 to 20 tons, and its hydraulic lift system can be used to pump heavy arms from the long arm of the jack. This device, the car jack, allows the automatic mechanic to check the brake system, check the chassis damage or check the exhaust pipe. Most car repair shops, car jacks are not used as alternatives to hydraulic lifts. They are only used for quick replacement of tire and landing gear inspection.